O. Medina is an independent consultant with experience in Computer Aid Drafting software, mainly Chief Architect and AutoCad. For the past seven years he has been developing residential Architectural Drawings, HVAC and electrical drawings for residential and commercial projects. As an Architectural residential drafter he had been involved in the complete design process of projects, including schemes proposals through final construction documents. He has generated drawings for floor plans, elevations, sections, structural, electrical, plumbing, site plans and detailed sections. Also he had developed 3D walkthrough video clips for some of the projects. Oscar is currently studying electrical engineering on-line at Stony Brook University in New York. He is a graduated engineer in electronics from Saint Thomas University in Bogota Colombia.
Connect
S. Gelmini has specialized in industrial and electrical Engineering, focusing on industrial automation, electrical installations of buildings, hospitals, apartments, houses, as well as electrical lighting. He has primarily worked on projects involving electrical, mechanical and architectural drawings.
Connect
M. Quindo is an expert in the design of high voltage applications using 2D and 3D CAD. He obtained his Bachelors Degree in Electrical Engineering at Holy Angel University and is a member of the Institute of Integrated Electrical Engineers of the Philippines Incorporated.
Connect
R. Pillai is an electrical engineer by profession . He has been in the domain of building services (electrical) for last 20 years. Besides the consulting service he also render services in 2D CAD and Revit platforms. He has extensive experience in the preparation of construction documents (architectural, HVAC, electrical and plumbing). He holds a bachelors degree in Electrical Engineering.
Connect
S. Tamrakar is an Electrical Engineer. Mr. Tamrakar is an expert at designing electric distribution systems, transmission lines and electrical light and power for buildings. Mr. Tamrakar recently served as Site Engineer, mainly bearing the responsibility of electrification systems for a corporate building site. Mr. Tamrakar also handled the design of electrical systems using AutoCAD. Mr. Tamrakar is skilled at 2D AutoCAD drawings. He has a BE degree in Electrical Engineering from the Institute of Engineering, Tribhuvan University, Nepal. He is registered at Nepal Engineering Council (the governing body of engineering in Nepal) as a Category A Engineer.
Connect
A. Khan is a qualified electrical engineering draughtsman and hands-on technical expert with an exceptional track record in the drafting of electrical designs and details for a diverse range of projects. He has extensive experience in electrical design, drafting and co-ordination (Building services and Offshore oil & gas):
Mr. Vaghela has been working on CAD-based projects since 2010 and has been consulting since 2015. He has a mechanical background, and he has been working mainly with civil engineers.
He prepares 2D drawings and 3D models using AutoCAD, Revit, Sketch up, Maya,
Creo, SolidWorks, Solid Edge, Autodesk 3ds Max, Inventor and CATIA.
He has been providing drafting services for the following:
• HVAC systems, electrical services, plumbing services
• P & ID Diagrams, Isometric drawings
• Fabrication drawings
• 3d modeling services
• Paper to cad drawing
• Miniatures
• Rendering
• Character design and animation walkthroughs
• Furniture design
He provides the following CAD-based services:
• CAD conversions (paper to cad, 2D to 3D, image to cad and AutoCAD to 3d modeling)
• 2D drafting services
• 3D modeling
• Animation
• Mechanism
• Product designing, conceptual designing
• Rapid prototyping services
• MEP(Mechanical, Electrical and Plumbing) services
In Civil services, he provides:
• Paper to CAD conversion
• Walk-through
• Architect model
• Paper to CAD conversion
The Architectural services that he has been providing includes:
• MEP Services, such as 2d drafting, 3d modeling, rendering service, photo rendering and animation services, renovations and walkthroughs.
He has also been providing the following reverse engineering services:
• He has worked on a binocular project for one of his clients.
• For one of his German clients he has worked on a gun probe design and defined a new design of handle.
• He has also worked on drawings for medical equipment, such as lenses and
lens cover. According to his client’s requirement, he creates a prototype and finalizes the product.
• He has worked on reverse engineering for automotive parts as well.
He has also worked on some of the following:
• Fluid flow/ gas flow meter
• Biometric Scanner (Sheet Metal)
• Spot Welding Fixtures
First the prototype is made ready and approved and then it is sent to the supplier for mass production.
He has been providing manufacturing support services as well, such as:
• Manufacturing of petrol – flammable liquid measuring device
• Casting support services
• Machining support services such as turning services, wire cutting, laser cutting, and water jet cutting services, plastic product – mould design and manufacturing services
Dabholkar has been working on CAD-based projects since 1997. He is a qualified mechanical draughtsman.
He has been working as a CAD expert for many companies in India. He is competent in AutoCAD-2D, SolidWorks, Revit 2009, ArchiCAD 11 and Vico Constructer. He is also proficient in Microsoft – Excel, Word, Power Point, CorelDraw and Photoshop.
He began working for CAD-based projects as a Senior CAD-draughtsman for an engineering services company where for three years he communicated with clients regarding their queries, scheduled and checked drawings prepared by a drafting team. He was working on electrical substation designs, electrical layout drawings, general arrangements, earth mat layouts, clearance diagrams, erection key drawings, protection drawings, structural drawings and architectural drawings.
He then started working as an AutoCAD designer for another company providing engineering-fabrication and construction services to construct heavy industrial Pre-Engineered Buildings (PEB). Here, he worked on PEB structural drawings, general arrangements, fabrication drawings and erection drawings for four years.
He then worked with a company trading, distributing and supplying bundle note counting machines. Here he worked for six years on note counting machines, mainly drawings and detailing of clamper assemblies, cam assemblies, rotor assemblies, fabrication drawings and machine assemblies.
Then he worked as a mechanical draughtsman for a company that manufacturers automobile parts, components and hard chrome plated shafts in India. Here he worked for two years on component drawings, detail drawings, assembly drawings of portable irons, portable fans, table fans, ceiling fans, rotors and stators.
He then worked as a mechanical draughtsman for an Indian multinational company engaged in design, manufacturing and marketing of products related to power generation, transmission and distribution. In the fan division of the design department he worked for three years on designs of fans, assembly drawings, detail drawings, component drawings, fan end shields, blades, rotors, stators and blade alignments. In the Machine Division of the design department he worked on designs of submersible pumps, component drawings of fans, end shields, main bodies, rotors, stators and shafts.
Rallay is a Certified SolidWorks Professional (CSWP). He is a mechanical design engineer and has been handling complex design projects since 2010. Most of his CAD projects are 3D models, electrical circuit diagrams, P&ID’s (Piping and Instrumentation Diagrams), sheet metal drawings and weldment drawing. He has experience in the following engineering disciplines:
He works as a freelance design engineer, offering support to small and medium scale industries in India. He has also successfully handled projects with American multinational conglomerates and some of Asia’s biggest transport equipment companies.
So far he has handled projects involving:
Some of his recent works include:
He likes to work on CAD software such as SolidWorks, Autodesk Inventor, Creo, and Pro/Engineer.
He aims to continuous learn and update his software skills as he believes that most clients, particularly real estate and architectural companies, look for quick delivery and accuracy and by honing his software skills he is able to work more efficiently and quickly. He employs quality control and maintenance techniques at all times.
He noted that since clients are very particular about commitment to the delivery schedules, it is very important for CAD professionals to maintain good communication. Mr. Rallay uses Skype and Zoom meeting software to tackle problems remotely, but whenever required, he meets his clients in person.
