Mr. Vaghela has been working on CAD-based projects since 2010 and has been consulting since 2015. He has a mechanical background, and he has been working mainly with civil engineers.
He prepares 2D drawings and 3D models using AutoCAD, Revit, Sketch up, Maya,
Creo, SolidWorks, Solid Edge, Autodesk 3ds Max, Inventor and CATIA.
He has been providing drafting services for the following:
• HVAC systems, electrical services, plumbing services
• P & ID Diagrams, Isometric drawings
• Fabrication drawings
• 3d modeling services
• Paper to cad drawing
• Miniatures
• Rendering
• Character design and animation walkthroughs
• Furniture design
He provides the following CAD-based services:
• CAD conversions (paper to cad, 2D to 3D, image to cad and AutoCAD to 3d modeling)
• 2D drafting services
• 3D modeling
• Animation
• Mechanism
• Product designing, conceptual designing
• Rapid prototyping services
• MEP(Mechanical, Electrical and Plumbing) services
In Civil services, he provides:
• Paper to CAD conversion
• Walk-through
• Architect model
• Paper to CAD conversion
The Architectural services that he has been providing includes:
• MEP Services, such as 2d drafting, 3d modeling, rendering service, photo rendering and animation services, renovations and walkthroughs.
He has also been providing the following reverse engineering services:
• He has worked on a binocular project for one of his clients.
• For one of his German clients he has worked on a gun probe design and defined a new design of handle.
• He has also worked on drawings for medical equipment, such as lenses and
lens cover. According to his client’s requirement, he creates a prototype and finalizes the product.
• He has worked on reverse engineering for automotive parts as well.
He has also worked on some of the following:
• Fluid flow/ gas flow meter
• Biometric Scanner (Sheet Metal)
• Spot Welding Fixtures
First the prototype is made ready and approved and then it is sent to the supplier for mass production.
He has been providing manufacturing support services as well, such as:
• Manufacturing of petrol – flammable liquid measuring device
• Casting support services
• Machining support services such as turning services, wire cutting, laser cutting, and water jet cutting services, plastic product – mould design and manufacturing services
P. Munusamy has been involved in the preparation of coal piping layout and piping supports (bowl mill to furnace) for boilers, isometric drawings for piping system, Bill of Materials (BOM), piping routing for boiler fuel oil systems, (HFO, LDO Tank to furnace). Involved in preparation of detail drawings for coal piping, shop bends, ceramic bends, structural layout for boilers, stokers, feeders, and transition chutes for boilers, HVAC, Plumbing schematics and layouts support for ducts. Involved in preparation of layout drawings for cement plants (Alkali by-pass, coal mill, lignite or coal dosing and firing system, raw meal storage silo). He has most recently served as a team leader responsible for project checking, guiding team members, communicating with customers regarding project queries and design concepts.
Connect
Arora has been working on CAD-based projects since 2008.
He is competent in AutoCAD, SolidWorks, Revit and Solid Edge. He has been designing end-to-end engineering services and products for the global automotive industry. He has been working on concept designing, reverse engineering, CAD-CAM services, paper to CAD conversion, 2D to 3D CAD conversion, design and development of systems – sub systems, validation, tooling, rapid prototyping, mould development, part sourcing and manufacturing support. He works on the designs of automotive parts such as axles, rear axle shafts, trac loc clutch hubs and ring and pinion sets.
His favorite software is SolidWorks for 3D and he has been providing accurately detailed drawings and models for around a decade now.
He communicates with clients using email-based communication. He also uses Skype and WhatsApp.
Kumar has been working on CAD-based projects since 2010. He is a qualified mechanical engineer and has been working mainly for oil and gas companies.
He works mainly on AutoCAD and SolidWorks for 2D as well as 3D modeling. He provides drafting and sketching services as well as Acrobat PDF conversion services.
He also worked in the field of paper-plant engineering from 2005-2010 during his studies. While working for paper-plant builders, he provided CAD services via email and phone. He has since been using email-based communication with clients but also visits client sites whenever there is a requirement. He uses Skype and WhatsApp for client communication as well.
Tawade is a certified electrical engineer and a company owner. He has been working on CAD-based projects since 2015.
He has been working mostly on electric control panel manufacturing and PLC (i.e. programmable logical control) service designing. He works mostly on panel-design software such as AutoCAD and EPLAN Electric P8. He has been creating a range of HMI (Human Machine Interface) devices. He has also been designing a range of industrial computer control systems (PLCs) that help to monitor states of input devices and make decisions to control output devices.
He prefers phone and email-based communication with clients and meets them face to face to arrive at important decisions.
A. Ali is an Interior Designer and 3d modeler. He is an expert in AutoCAD, and provides drafting, designing and 3d modeling services. He has a certificate in interior designing from CRISP and 3ds Max with V-ray.
1. What kinds of clients do you serve?
All kinds of companies that require machining of car parts. I design car or industrial part machining lines, including design of special machines, fixtures, transfer lines, FMS lines and multi spindles.
2. What was the most interesting CAD project that you ever worked on? What made it interesting? What challenges did you face?
Design the metalic car parts production & machining lines like the Peugeot 206 & 504 pivot and rear arme, the Renault drive shaft, a KIA Motors cylinder block and head, and EF7 motor cylinder block & head and brake disk lines.
3. Of the software tools that you use, which is your favorite and why?
Mechanical Desktop , because it has very powerful 2D. And Catia software , because it has very powerful 3D, analyse, and CAM. Also, Master CAM and Powermill.
4. What trends are you observing in the market for CAD services? How have these trends affected you, and how are you responding to them?
The latest technologies enable us to finish projects quick and easy.
5. What do you like about working as an interim CAD draftsman or external CAD consultant working on a time-bound project?
I can work both on site and remotely.
6. Have you ever provided CAD consulting services remotely, either via phone, the Web or email? Do you use any screen sharing tools (like Webex, Skype, or GoToMeeting), and are they effective? What kinds of questions and problems could you tackle remotely? Are there any issues that you feel are better handled face-to-face?
Face to face is best, and after that is email. Skype is last because my net connection speed is not good.
Connect