151 Search Results for Drafting Design

A. Ali is an Interior Designer and 3d modeler. He is an expert in AutoCAD, and provides drafting, designing and 3d modeling services. He has a certificate in interior designing from CRISP and 3ds Max with V-ray.

Interview with Mr. A. Ali

1. What kinds of clients do you serve?

   All kinds of companies that require machining of car parts. I design car or industrial part machining lines, including design of special machines, fixtures, transfer lines, FMS lines and multi spindles.

2. What was the most interesting CAD project that you ever worked on? What made it interesting?
   What challenges did you face?

   Design the metalic car parts production & machining lines like the Peugeot 206 & 504 pivot and rear arme, the Renault drive shaft, a KIA Motors cylinder block and head, and EF7 motor cylinder block & head and brake disk lines.

3. Of the software tools that you use, which is your favorite and why?

   Mechanical Desktop , because it has very powerful 2D. And Catia software , because it has very powerful 3D, analyse, and CAM. Also, Master CAM and Powermill.

4. What trends are you observing in the market for CAD services? How have these trends affected you, and how are you responding to them?

   The latest technologies enable us to finish projects quick and easy.

5. What do you like about working as an interim CAD draftsman or external CAD consultant working on a time-bound project?

   I can work both on site and remotely.

6. Have you ever provided CAD consulting services remotely, either via phone, the Web or email?
   Do you use any screen sharing tools (like Webex, Skype, or GoToMeeting), and are they effective?
   What kinds of questions and problems could you tackle remotely?
   Are there any issues that you feel are better handled face-to-face?

   Face to face is best, and after that is email. Skype is last because my net connection speed is not good.

S. Mulay is an independent CAD consultant, focusing on mechanical design and drafting activities (primarily drawings for static equipment, storage tanks, structural, architectural).

• Provides basic engineering and preparation of engineering & fabrication drawings and checking of pressure vessels, heat exchangers, columns, storage tanks (cone roof, dome roof, external and internal floating roof tanks, double wall tanks, mounded bullets).
• Prepares design and development plans, including schedules and activities.
• Designs equipment in PVElite and Codecalc 2006/08, using EXL sheets and standard engineering practices.
• Prepares mechanical data sheets and design calculations of equipment such as pressure vessels and storage tanks with review of basic documents such as the process flow diagrams, piping & instrumentation diagrams, and process data sheets.

M. Aslam is a CAD designer and an expert in AutoCAD Map 3D, Corel Draw and 3D Studio Max. He provides the following services:

1. Cad Conversion Service
2. Paper to Cad Conversion
3. Cad Drafting Services
4. Exterior 3d
5. Interior 3d

Y. Sharma is a provider of Design Support Services, focusing on the following activities:

1. Civil/ Structural Engineering:

   Provides Design, Analysis, Drafting & Detailing services for: a. Industrial Structures like Plant Buildings (both RCC & Steel Structures), Compressor House with EOT Cranes, Substation Buildings with Transformers, Control Rooms, Workshop Buildings, Pipe & Cable Racks, Conveyor gantries & Transfer towers, Stack like structures like chimneys, flare stacks, Static & Dynamic Equipment Foundations, Cooling Tower Basin & Pump House. b. Utilities: like Water Supply Systems with Surface & Ground Water, Roads, Drainage & Sewerage Storage Reservoirs. c. Building Structures: like Healthcare Buildings, Hospitality & resort Buildings, Educational Buildings, Commercial & Retail, Residential Buildings & Complexes. d. Steel Detailing: Also works on Tekla (X-Steel), Strucad and Autocad, and can produce Shop drawings, Fabrication drawings, Rebar details, Erection/ Field Drawings, material take offs and As-built drawings.

2. Architecture:

   Provides the following services: a. Schematic Design b. Design Development c. Construction Documentation d. As-built, Record & Shop Drawings e. 2D to 3D (BIM) Conversion. Works on 2D Software like AutoCad and BIM Software like Revit and have experience of working on Healthcare, Education, Commercial, Retail, Mixed Use, Residential & Industrial projects.

3. Mechanical Engineering:

   Provides Design, Analysis, Drafting & Detailing services for Bulk Material Handling.

A. Khan is a qualified electrical engineering draughtsman and hands-on technical expert with an exceptional track record in the drafting of electrical designs and details for a diverse range of projects. He has extensive experience in electrical design, drafting and co-ordination (Building services and Offshore oil & gas):

• External/infrastructure layouts including HV/MV, LV & ELV Systems.
• HV/MV and LV sub-station Layout, section, elevation and details drawings (including equipment arrangement, trench layout, earthing & lighting protection, etc.).
• MEP Co-ordination layouts (building service & external/infrastructure). Co-ordination drawings with all other discipline(architectural, civil & structural etc).
• Builder

M. Charan, a design engineer, is an expert in modeling, 2d drafting and animation. He has a Bachelors in Mechanical Engineering.

P. Nandi is a CAD draughtsman who specializes in AutoCAD, Revit, BIM Management and Project Management. He is proficient in engineering drafting and the practical application of AutoCAD and Revit in engineering design. He is fully conversant with drafting standards and practices, including civil, CAD and architectural designing. He has a thorough understanding of operating CAD in preparing drawing for various discipline — plans, layouts, detailed drawings, presentation drawings, bid packages, working drawings, etc.

View Samples

C. Patil has a diploma in Fabrication Technology & Erection Engineering(Mechanical) and is a senior design engineer. He is an expert in Unigraphics NX-6, which includes modelling, drafting, motion simulation and knowledge fusion.

S. Ghosh is a senior cad designer specializing in the design and drafting of bulk material handling equipment. He has extensive experience in the field of coal handling equipment and the use of Microstation and Smart Plant P&ID to draft piping and instrumentation diagrams and isometric from GA of piping drawings. Mr. Ghosh started his carrier as a cad draftsman, and was responsible for implementing the use of CAD tools in the field of CAD conversion and GIS. He has a BE degree.

View Samples

S. Sain specializes in the preparation of engineering drawings for piping (e.g. for oil, gas and water). He prepares BOM, Equipment Layouts, Piping layout, piping support layout, Piping routing & modelling, and isometric drawings in Auto CAD. His experience includes the follow: – Preparation of piping conceptual drawing. – Piping routing and piping layout development. – Preparation of equipment layout, piping support layout, piping isometric drawings, P&ID using AutoCAD – Review/checking of 3D piping model – Application of ASME/ANSI/DIN standards. Mr. Sain is an expert in AutoCAD (all versions), Auto Plant-2006 (3d piping software) Navis Works Freedom 2009. Autodesk Design Review Solid Works-2008 (3D software) Unigraphic NX-2 & 3 (3D software) and MDT-6 (3D software) Mr. Sain has a Diploma in Mechanical Engineering and in CAD Drafting.

A. Liyanage is an expert in Autocad for architectural design and highway/road design drafting. He earned a National Certificate in technology in civil engineering, Autocad and building construction technical certificates. He has many years of experience in architectural, structural and highway road works drafting. He worked as an architectural draughtsman and Autocad drafter. Mr. Liyanage is currently an independent Autocad drafter involved in Autocad outsourcing, as well as home and building design.

S. Agrawal is currently working as an independent architectural consultant, focusing on innovative design. He specializes in converting ideas and design into digital media through software such as AutoCAD, SketchUP and Photoshop. He was the team-leader in an architectural firm for many years, where he managed all types of Autocad drafting, 3d work and presentations. He is also proficient in preparing working drawings for the constructing of buildings. Mr. Agrawal started his career as an architect. He has a B.Arch degree from Delhi and a Masters in Environmental Architectural design from University of Sheffield, UK.